Tuesday, May 26, 2009

File Delete Problem:

How to delete a file when the windows displays file access denied, "file in use' error, cant delete the file,etc

Here i Present you the solution of this common problem:

Despite all its quirks, Windows does do some things for a good reason. Some files need to be locked down when they are in use, otherwise you risk damaging the file or harming the Operating System. Unfortunately Windows XP seems to be plagued by files that cannot be deleted. These are frequently simple files like videos (AVI), MP3s or other seemingly harmless files. You try to delete the file, Windows waits a few seconds before announcing that access is denied, the file is currently in use and cannot be deleted. However, you know it's not in use and you just want it deleted.

If you have encountered this problem, here is a step-by-step process for trying to purge the files you can't delete. It starts with the basics for Windows XP and moves on to more involved tricks. The process will work for all recent Windows releases, but Windows XP has been causing the most the problems, so we will focus on it. Please note: we are assuming that the file is not crucial to the operation of Windows - deleting important system files can cause havoc.

  1. Is the file in use? It sounds obvious but it happens. If it is being used or open, close the file and the application that opened it. For example, if it is a Word document, close Microsoft Word.
  2. If the file was opened in an application (and subsequently closed), but the program is still running, try quitting the program. Windows will lock a file because the application hasn't yet released it. This is not always Windows fault and can be the fault of the program.
  3. If the file is an AVI, in particular a DivX AVI, try renaming it and then deleting it. DivX files don't get on very well with Windows XP and sometimes renaming the file can trick Windows into releasing it.
  4. Reboot your PC and don't start any programs. Go directly to the file and delete it.
  5. In Windows Explorer, switch to View-Details and then select View-Choose Details. Uncheck everything except the file name. This stops Windows XP trying to read the file - this problem affects many video, audio and graphics files.
  6. Still no luck? OK, here is the best trick of all. Most sites give you cryptic Windows registry and DOS commands to remove a file, but the answer is so much simpler. Get a copy of MoveOnBoot. It's free and this simple tool allows you to Move, Copy or Delete files before Windows can lock or alter the files. The changes are made to your hard drive before Windows starts, hence it requires a restart of your system after you give MoveOnBoot its instructions. There are no messy boot or DOS commands, just a simple 3-step process.

    Step 1: Locate the name of the file that is causing your problems.

    Step 2: Decide if you want to copy, move or delete the file.

    Step 3. Choose a destination for moving the file, or a new file name for the rename option (this option won't appear if you are deleting a file).

    Click OK to confirm you want to process. The nice thing is that the program doesn't make you reboot straight away. It's a good idea to reboot ASAP, but if you are in the middle of something and want to wait, the program will simply run next time you start Windows.
  7. If the file reappears again (check its creation date to ensure it is being recreated) and you can't make it budge, you may have trouble with spyware or a virus on your system (don't overlook the possibility it may also be an important system file). In this case you should get a good spyware removal program to scan your system.

CRC Errors

Data errors or ‘Cyclic Redundancy Check’ (CRC) errors occur to ensure that your data is intact when being transferred. If the data has been damaged this checking procedure immediately identifies it. When CRC messages are displayed on your screen, it means that the files are being read by the system or the software has failed, but it does not indicate towards the complete loss of data.

Data are generally transferred in small blocks and each block is assigned a CRC value. If there is something amiss while the data is being transferred from the source to the destination, the CRC reaching the source fails to match the calculation at the destination, resulting into appearance of and CRC error. These errors are usually thrown out when the system tries to read data from a damaged CD or DVD. The respective drive may grind or whirl away and your system may slowdown just before a CRC error is displayed. System crashes, incomplete download and buggy software can also cause this error.

For the case of your CDs and DVDs, if the drive gets a CRC message, it tries to read the disk again and after repeated failed attempts, it throws out a CRC error. A problem related to hardware, software or damaged media causes this error. You can try cleaning the disc to fix it but if the problem persists, it can be attributed to a hardware issue. You can check the discs in another drive. Poorly burnt discs or USB burners burnt at a very high speed also can cause this problem. Using a reliable recovery tool is advisable to recover data from damaged discs.

Sunday, May 24, 2009

List of Free Open Source Software’s For Windows:

For web browsing:

Mozila Firefox: click here

For Video Player/Video Podcasting:

Miro: click here

For instant Messaging

Pidgin: click here

For Emailing:

Mozila Thunderbird: click here

Video playback:

VLC: click here

Mplayer: click here

Media Player Classic: click here

DVD ripping:

Media Coder:click here

Word Processing / Office Suites:

Openoffice.org: click here

AbiWord:click here

Personal Finance:

TurboCASH: click here

3D Graphics And Modelling:

Blender: click here

Free File Hosting:
CC Publisher: click here

Security Tools:

True Crypt:click here

NMap:click here

Nepali Flag

Nepali Flag